Anderson Group Australia - Focaseiki Vertical Machining Centre VMC-1600 | 1800 | 2000

When Power Meets Performance. The VMC-1600 | 1800 | 2000 Vertical Machining Centres.

The Focaseiki VMC-1600 | 1800 | 2000 Vertical Machining Centres are built for machining larger workpieces with faster cycle times. They utilise heavy-duty components for high performance.

Key features:

  • Y-Axis Travel: Features an extra-large Y-axis travel of 1000mm for large workpiece machining options.

  • Guideways: The X, Y, and Z axes use heavy-loading 55mm "6x8x6" slide blocks and cross roller-type linear guideways. The 2000 models specifically use NSK roller-type slide blocks on the Y-axis for increased machine stability and precision.

  • Rapid Traverse: The rapid traverse rate is 24/24/20 m/min.

  • Ball Screw: A large-diameter 63mm C3 ball screw is used on all three axes (X, Y, and Z).

  • Spindle & Z-Axis: Has a low-speed, high-torque wide-range spindle motor option. The Z-axis uses a servo motor brake system and two cylinders for counter-balance to achieve high performance.

Anderson Group Australia - Focaseiki Vertical Machining Centre VMC 1600 | 1800 | 2000

• FERROUS METALS •

• NON-FERROUS METALS •

• FERROUS METALS •

• NON-FERROUS METALS •

• FERROUS METALS • • NON-FERROUS METALS • • FERROUS METALS • • NON-FERROUS METALS •

Photos

SPECIFICATIONS:


MODEL: VMC-1600(1676) VMC-1800(1876) VMC-2000(2076)
Table Size (mm) 1700x1000(760) 1900x1000(760) 2100x1000(760)
X/Y/Z Travel (mm) 1600/1000/800
(1600/760/720)
1800/1000/800
(1800/760/720)
2000/1000/800
(2000/760/720)
Spindle (RPM) ISO-50:6000/8000/10000
ISO-40:8000/10000/12000/15000
ATC (T) ISO-50:24/32/40 (ISO-40:24/30)
ISO-40:24/30 (ISO-50:20/24)
Rapid Feed Rate (M/min) 20/20/15(24/24/20)
Guide Way Roller Type Linear Guides
Previous
Previous

Vertical Machining Centre | VMC-1100/1250/1400

Next
Next

VMC With APC | VMC-600/860/1100APC